Click on image to see a message.
Hedge Trimmers

The technology that has driven Shindaiwa’s reputation for quality is stronger than ever. Those standards produce results like precise engine timing, greater durability, low emissions, low noise and fuel economy. Their C4- clean engines beat current emission standards by 20%. These products are built in Japan, and are available at Albany Mowers and Chainsaws Ltd, Albany Village, opposite the big Shell Service Station.

AH230

Light and powerful, the AH230 articulated short-shaft hedge trimmer has 22” double-sided reciprocating blades and is the perfect tool for trimming tall hedges, low ground cover and whatever is in between.

All Shindaiwa articulated hedge trimmers feature durable StaySharp™ chrome-plated blades that cut with more precision and stay sharp longer

AH230

  • Dry weight 13.1 lbs. (6.0 kg)
  • Displacement 1.4 cu. in. (22.5 cc)
  • Output 1.1 hp (0.8 kW) @ 7500 rpm
  • Overall length 92.9 in. (2360 mm)
  • Fuel tank capacity 18.7 oz. (554 ml)
  • Blade length 22.3 in. (567 mm)
  • Carburetor Walbro barrel valve
  • Fuel 50:1 Ratio Fuel/Mixing Oil
  • Range of Articulation 150°

AH230 Features

  • Shindaiwa-built premium 2-cycle engine
  • Walbro WYL-26A carburetor with primer
  • Chrome-plated cylinder
  • 2-ring piston
  • One-piece, transistor-controlled ignition system
  • Adjusts to 10 different positions through a range of 150º
  • Efficient, double-sided cutter
  • Silenced air cleaner
  • Convenient controls

AH2510

With more length and range of motion, the Shindaiwa AH2510 can handle any hedge – high or low, with 22” double-sided reciprocating blades that are also perfect for brush and ground cover. The Shindaiwa AH2510 features Shindaiwa’s patented C4 Technology® engine for remarkable power with low engine noise, low emissions, and excellent fuel economy.

AH2510 Features

  • 24.5 cc displacement
  • High torque engine delivers 1.1 horsepower (0.8 kW) @ 7,500 rpm
  • Shindaiwa C4 Technology® engine (U.S. patent number 4,708,107)
  • Adjusts to 10 different positions through a range of 150º
  • Efficient, double-sided cutter. Blades fold back for easy and safe storage.
  • Large fuel tank: 20.3 ounces (590 ml)
  • Walbro WYL barrel valve carburetor for all position use, and excellent throttle response
  • Chrome plated cylinder with 2-ring piston design
  • Quality ball and caged needle bearing construction
  • Low noise characteristics of a 4-cycle engine
  • Better fuel economy
  • And it's "business as usual" with the recommended
  • Shindaiwa ONE™ 50:1 2-cycle mix - No Dipstick!

AH2510

  • Dry weight 14.0lbs. (6.36 kg)
  • Displacement 1.5 cu. in. (24.5 cc)
  • Output 1.1 hp (0.8 kW)
  • Overall length 93.2 in. (237 cm)
  • Fuel tank capacity 20.0 oz. (590 ml)
  • Blade type Double Edge
  • Range of Articulation 150 degrees
  • Cutting Positions 11 locking
  • Fuel 50:1 Ratio Fuel/Mixing Oil

DH220 DH230

The DH220 and DH230 models have been designed to deliver great reliablity and performance. The DH230 is available with either a 24 or 30-inch double-sided cutting blade. DH models are equipped with dual-action cutting blades, and a centrifugal clutch with redesigned clutch shoes that resist shock loads.

Features

  • Double edge blade
  • Single thumbscrew easy-access air cleaner
  • Centrifugal clutch
  • Clutch shoes are made of a high-tech composite material formulated to resist shock loads.
  • Shindaiwa-built premium 2-cycle engine
  • Chrome-plated cylinder
  • 2-ring piston
  • 3-piece crankshaft
  • Ball-and-caged needle bearing construction
  • Walbro WYJ diaphragm carburetor for all-position operation and smooth power
  • Anti-vibration mounted fuel tank
  • Fully electronic, 1-piece ignition system
  • Forced-air cooling, discharged away from operator
  • Air cleaner with single thumbscrew access
  • Forged one piece clutch drum and bonded shoe clutch
  • Gearcase features fewer moving parts for improved reliability and serviceability
  • Improved handle and throttle control
  • Rear handle with anti-vibration mounts and all-in-one control

DH230: 24" & 30"

  • Dry weight 24: 12.2 lbs. (5.5 kg) 30: 12.8 lbs. (5.8 kg)
  • Displacement 1.4 cu in. (22.5 cc)
  • Output 1.1 hp (0.8 kW) @ 8000 rpm
  • Fuel tank capacity 20.3 oz. (600 ml)

Overall length

  • 24: 42.5 in. (108 cm)
  • 30: 48.0 in. (122 cm)

DH2510

The Shindaiwa DH2510 is powered by a high-torque, 1.1 horsepower (0.8 kW), 24.5cc displacement C4 Technology® engine designed for the demanding commercial market. These Shindaiwa hedge trimmers feature the all-position operating range and great throttle response of a 2-stroke. Low engine noise, improved fuel economy, and dramatically reduced exhaust gas emissions are all added benefits of the engines C4 Technology®.

Features

  • Double-sided blades
  • 24.5 cc displacement
  • High torque engine delivers 1.1 horsepower
  • Shindaiwa C4 Technology® 4-cycle engine ( U.S. patent number 4,708,107)
  • Chrome-plated, StaySharp™, self-adjusting blades
  • Non-reversible heavy-duty air filter
  • Walbro WYL barrel valve carburetor for all position use; excellent throttle response, and fuel metering
  • Chrome plated cylinder with 2-ring piston design
  • Quality ball and caged needle bearing construction
  • Conrods have needle bearings with retainer
  • Anti-vibration front and rear handles
  • Low exhaust emissions
  • Better fuel economy compared to 2-cycle engines
  • High blade speed for faster, cleaner cuts
  • And it’s “business as usual” with the recommended Shindaiwa One™ 50:1 2-cycle mix - No oil check or change required!

DH2510: 24" & 30"

  • Dry weight 24: 12.8.0 lbs. (5.8 kg) 30: 13.0 lbs. (5.9 kg)
  • Displacement 1.5 cu. in. (24.5 cc)
  • Output 1.1 hp (0.8 kW)
  • Fuel tank capacity 18.6 fl. oz. (550 ml)
  • Blade type Double Sided
  • Overall length 24: 43.3 in. (110 cm) 30: 48.0 in. (122 cm)
  • Carburetor Walbro barrel-valve
  • Fuel 50:1 Ratio Fuel/mixing oil

HT230

The HT230 model have been designed to deliver great reliability and performance. HT models are equipped with dual-action cutting blades, and a centrifugal clutch with redesigned clutch shoes that resist shock loads. The HT230 is available with either a 30 or 40-inch single-sided cutting blade and an optional deflector shield allowing you to sweep away trimmings from the hedge.

Features

  • Double Action, Single Edge Blade
  • Single thumbscrew easy-access air cleaner
  • Centrifugal clutch
  • Clutch shoes are made of a high-tech composite material formulated to resist shock loads.
  • Shindaiwa-built premium 2-cycle engine
  • Chrome-plated cylinder
  • 2-ring piston
  • 3-piece crankshaft
  • Ball-and-caged needle bearing construction
  • Walbro WYJ diaphragm carburetor for all-position operation and smooth power
  • Anti-vibration mounted fuel tank
  • Fully electronic, 1-piece ignition system
  • Forced-air cooling, discharged away from operator
  • Air cleaner with single thumbscrew access
  • Forged one piece clutch drum and bonded shoe clutch

HT230: 30" & 40"

  • Dry weight 30: 12.3 lbs. (5.6 kg) 40: 13.4 lbs. (6.1 kg)
  • Displacement 1.4 cu. in. (22.5 cc)
  • Output 1.1 hp (0.8 kW) @ 8000 rpm
  • Fuel tank capacity 20.3 oz. (600 ml)
  • Overall length 52.4 in. (133 cm)

Standard Equipment

  • Rear handle with integral controls
  • Engine isolated anti-vibration mounts
  • Front handle with guard
  • Tool set
  • Scabbard

Optional Equipment

  • Deflector Shield

HT2510

The Shindaiwa HT2510 is powered by a high-torque, 1.1 horsepower (0.8 kW), 24.5cc displacement C4 Technology® engine designed for the demanding commercial market. These Shindaiwa hedge trimmers feature the all-position operating range and great throttle response of a 2-stroke. Low engine noise, improved fuel economy, and dramatically reduced exhaust gas emissions are all added benefits of the engines C4 Technology®.

Features

  • 24.5 cc displacement High torque engine delivers 1.1 horsepower
  • Shindaiwa C4 Technology® 4-cycle engine ( U.S. patent number 4,708,107)
  • Chrome-plated, StaySharp™, self-adjusting blades
  • Non-reversible heavy-duty air filter
  • Walbro WYL barrel valve carburetor for all position use; excellent throttle response, and fuel metering
  • Chrome plated cylinder with 2-ring piston design
  • Quality ball and caged needle bearing construction
  • Conrods have needle bearings with retainer
  • Anti-vibration front and rear handles
  • Low exhaust emissions
  • Better fuel economy compared to 2-cycle engines
  • High blade speed for faster, cleaner cuts
  • And it’s “business as usual” with the recommended Shindaiwa One™ 50:1 2-cycle mix - No oil check or change required!

HT2510: 30" & 40"

  • Dry weight 30: 12.5 lbs. (5.7 kg) 40: 13.2 lbs. (6.0 kg)
  • Displacement 1.5 cu. in. (24.5 cc)
  • Output 1.1 hp (0.8 kW)
  • Fuel tank capacity 18.6 fl. oz. (550 ml)
  • Blade type Single Sided
  • Overall length 30: 43.3 in. (110 cm) 40: 55.1 in. (140 cm)
  • Carburetor Walbro barrel-valve
  • Fuel 50:1 Ratio Fuel/mixing oil
SHINDAIWA 22DH HEDGETRIMMER
The 22DH features Shindaiwa’s 21.1cc 2-stroke engine for power and reliability, as well as a lightweight 5kg design that makes this unit easy to manoeuvre. This Hedge trimmer also features double sided blades for precise and accurate cuts. The 22DH is supported by Shindaiwa’s 5 year Domestic and 2 year commercial warrantee.
  • Dry Weight 4.5 kg
  • Displacement 21.1 cc
  • Output 0.59 kw
  • Bar Length 22"
  • Full serviceable gearbox and cutter blades that can be sharpened provide a long and reliable service life of unit
  • Powerful 2-cycle engine delivers professional power
  • Walbro WYL barrel-valve carburettor for excellent throttle response and reduced fuel emissions
  • Compact light-weight design for easy manoeuvrability
  • Fuel tank, front and rear handles fitted with effective anti-vibration cushions that reduces operator fatigue
  • Double action reciprocating blades provide extra cutting power